Yeah that's what I try, but it comes up with the same error :\
Should I re-create the database? I have no problem doing it, I just
don't know how :\ 


Thanks and Kind Regards, 
 
Ian Moroney
Field Engineer
 
T: 020 8891 3010
M: 07791 965924
F: 020 8288 2591
www.techdivision.co.uk
 
TechDivision - Making IT Work

-----Original Message-----
From: user-bounces at open-xchange.org
[mailto:user-bounces at open-xchange.org] On Behalf Of Mario Camou
Sent: 06 February 2007 12:53
To: User support
Subject: Re: [OX User] installation problem

That is right, you SHOULD type test, not the generated SSHA digest.

-Mario.

On 2/6/07, Ian Moroney <ian.moroney at techdivision.co.uk> wrote:
> For the rootpw in slapd.conf I am using the password that I created 
> when using slappasswd.
> I copied and pasted in the SSH data for the password. Does that mean 
> that I can use the text that I used as the password when I ran 
> slappasswd?
> E.G:
> Slappasswd
> new password: test
> Re-enter new password: test
> {SSHA}blahblahblah
>
> I have copied and pasted the {SSHA} key into rootpw.
> When ldapadd asks me for the password, can I type test instead of the 
> full ssha key?
>
>
> Thanks and Kind Regards,
>
> Ian Moroney
> Field Engineer
>
> T: 020 8891 3010
> M: 07791 965924
> F: 020 8288 2591
> www.techdivision.co.uk
>
> TechDivision - Making IT Work
>
> -----Original Message-----
> From: user-bounces at open-xchange.org
> [mailto:user-bounces at open-xchange.org] On Behalf Of Mario Camou
> Sent: 06 February 2007 12:40
> To: User support
> Subject: Fwd: [OX User] installation problem
>
> Hi,
>
> You should use the password for the cn=Manager,dc=global-drum,dc=com 
> LDAP user, it might be defined in the directory itself or in 
> /etc/openldap/slapd.conf, look for the rootpw entry.
>
> HTH,
> -Mario.
>
> On 2/6/07, Ian Moroney <ian.moroney at techdivision.co.uk> wrote:
> > Hi guys, i have a small problem with the installation of OX on SuSE 
> > 10.1. I am currently using the guide at heinous.org
> > (http://www.heinous.org/wiki/Open-XChange_on_SUSE_10.1) to install 
> > OX,
>
> > and i am at the stage where i have to do an ldapadd command. I do 
> > the
> > following:
> >
> > ldapadd -x -H ldap://global-drum.com -D 
> > cn=Manager,dc=global-drum,dc=com -W -f 
> > /usr/share/open-xchange/init_ldap.ldif
> > it then asks me to enter the LDAP password (i don't actually 
> > remember setting an LDAP password??) so i enter my root password.
> > It then comes back to me saying:
> > ldap_bind: Invalid credentials (49)
> >  additional info: 80090308: LdapErr: DSID-0C09030B, comment:
> > AcceptSecurityContect error, data 525, v893 Is there a specific 
> > password that i need to enter in order for openldap to accept the 
> > ldapadd command? if so, where is it set/reset so i can use it.
> >
> > Thanks and Kind Regards,
> >
> > Ian Moroney
> > Field Engineer
> >
> > T: 020 8891 3010
> > M: 07791 965924
> > F: 020 8288 2591
> > www.techdivision.co.uk <http://www.techdivision.co.uk/>
> >
> > TechDivision - Making IT Work
> >
> > _______________________________________________
> > User mailing list
> > User at open-xchange.org
> > http://www.open-xchange.org/cgi-bin/mailman/listinfo/user
> >
>
>
> --
> Kilroy 2.0 is Everywhere
>
>
> --
> Kilroy 2.0 is Everywhere
>
> _______________________________________________
> User mailing list
> User at open-xchange.org
> http://www.open-xchange.org/cgi-bin/mailman/listinfo/user
>
> _______________________________________________
> User mailing list
> User at open-xchange.org
> http://www.open-xchange.org/cgi-bin/mailman/listinfo/user
>


--
Kilroy 2.0 is Everywhere

_______________________________________________
User mailing list
User at open-xchange.org
http://www.open-xchange.org/cgi-bin/mailman/listinfo/user